MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479 - Astec MP1 MVP Series Power Supplies - 400 - 1200W...
- Part Number:
- MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479
- Model Number:
- MP1-1L-1N-1J-1J-1Q-4LL-4NN-00-479
- Make:
- ASTEC
- Lead Time:
- Available
- Qty In Stock:
- Available
Astec MP1 MVP Series Power Supplies - 400 - 1200W Modular Power Supplies Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Additional 200 W output @ high line (180-264 VAC)
- CISPR 22, EN55022 Curve B conducted / radiated EMI
- Current share on all outputs with ratings of 10 A or greater
- Customer-provided air option
- EN61000 immunity standards
- EN61000-3-2 harmonic distortion compliance
- European CE Mark requirements
- Forced air cooling, field replaceable fan
- Global and individual module inhibits/enable
- Global DC OK signal and status indicator LED
- Input OK signal and status indicator LED
- Isolated 5 V bias voltage
- Low leakage option for medical applications
- Margining on all single output modules
- Optional VME timing and system DC OK module
- Overload protection on all outputs
- Power factor correction
- Remote sense on all outputs with ratings greater than 2 A
- Voltage adjustment on all outputs
Specifications
- AC OK: >5 ms early warning min. before outputs loose regulation | Full cycle ride thru (50 Hz)
- Adjustment range: ±10% min. all outputs
- Cooling: Internal DC fan or customer provided air (option)
- Dynamic response: <2% or 100 mV, with 25% load step.
- Efficiency: 70-80% typ. @ full case load
- Frequency: 47-440 Hz
- Holdover storage: 20 ms minimum (independent of input VAC)
- Humidity: 95% non-condensing
- Input Voltage: 85-264 VAC | 120-350 VDC
- Inrush Current: 40 A peak max. (soft start)
- Margining: ±4-6% nom.1
- Operating Temperature: -20°C to 50°C (start @ 0°C) | (derate each output linearly to 50% at 70°C) | (-20°C to 40°C max. with rear air option)
- Power Factor: 0.99 typ. meets EN61000-3-2
- Recovery time: To within 1% in <300 µsec.
- Ripple: RMS: 0.1% or 10 mV, whichever is greater | Pk-Pk: 1.0% or 50 mV, whichever is greater | Bandwidth limited to 20 MHz
- Shock/Vibration: Mil-Hdbk 810E
- Storage Temperature: -40°C to +85°C
- Temperature Coefficient: 0.02% per °C
- Turn-on time: AC on 1.5 sec typ., Inhibit / Enable 150 ms typ.
Applications
- None Available
Aliases
- None Available
