73-540-0020 - Astec 73-540-0020 MP4-2Q-00 400W Modular Industrial Power Supply; 24V/15A DC...
- Part Number:
- 73-540-0020
- Model Number:
- 73-540-0020
- Make:
- ASTEC
- Lead Time:
- Available
- Qty In Stock:
- Available
Astec 73-540-0020 MP4-2Q-00 400W Modular Industrial Power Supply; 24V/15A DC Output. 100-240V 7A 50/60/400Hz Frequency. Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- CISPR 22, EN55022 Curve B conducted / radiated EMI
- Current share on all outputs with ratings of 10 A or greater
- European CE Mark requirements
- Forced air cooling, field replaceable fan
- Global and individual module inhibits/enable
- Global DC OK signal and status indicator LED
- IEC EN61000-3-2 harmonic distortion compliance
- Immunity - EN61000 -4, -2, -3, -4 & -5 Level 3
- Input-OK-signal and status indicator LED
- Isolated 5 V bias voltage
- Low leakage option for medical applications
- Margining on all single output modules
- Optional VME timing and system DC OK module
- Overload protection on all outputs
- Power factor correction
- Remote sense on all outputs with ratings greater than 2 A
- Voltage adjustment on all outputs
Specifications
- AC OK: >5 ms early warning min. before outputs lose regulation; Full cycle ride thru (50 Hz)
- Adjustment range: ± 10% minimum all outputs
- Bandwidth: limited to 20 MHz
- DC OK: -2% to -8% of nominal for any monitored output
- Dynamic response: < 2% or 100 mV, with 25% load step
- Efficiency: 70 - 80% typ. @ full case load
- EMI filter (low leakage option): CISPR 22/EN55022 Level “A”
- EMI filter standard: CISPR 22/EN55022 Level “B”
- Frequency: 47 - 440 Hz
- Global Inhibit/Enable: TTL, Logic “1” and Logic “0”
- Harmonic distortion: Meets EN61000-3-2
- Holdover storage: 20 ms minimum (independent of input Vac)
- Housekeeping Bias voltage: 5 Vdc @ 1.0 A max. present whenever AC input is a
- Input fuse (internal): MP4 10 A; MP6
- Input range: 85 - 264 Vac; 120 - 350 Vdc
- Inrush Current: 40 A peak max. (soft start)
- Isolation: Meets EN60950
- Leakage current (low leakage option): 300µA max. @ 240 Vac
- Leakage current standard: 2.0 mA max. @240 Vac
- Margining: ± 4 - 6% nominal1
- Minimum Load: Not required on single or triple output. 10% required on main of dual output
- Module inhibit: TTL, isolated, singles and dual (both outputs) only
- Output/Output isolation: >1 Megohm
- Overall regulation: 0.4% or 20mV max.(36 W modules 4% maximum)
- Overcurrent protection: Single output module & main output of dual output module 105-120% of rated output current. Aux output of dual output module 105-140% of rated output current
- Pk-Pk: 1.0% or 50mV, whichever is greater
- Power Factor: 0.99 typ. meets EN61000-3-2
- Radiated EMI: CISPR 22/EN55022 Level “B”
- Recovery time: To within 1% in < 300 µsec
- Remote sense: Up to 0.5 V total drop (not avbl on triple output module)
- Reverse voltage protection: 100% of rated output current
- Ripple RMS: 0.1% or 10mV, whichever is greater
- Single wire parallel: Current share to within 2% of total rated current
- Switching frequency: 250k Hz
- Thermal protection: All outputs disabled when internal temp exceeds safe operating range. > 5ms warning (AC OK signal) before shutdown
- Turn-on time: AC on 1.5 sec typ. inhibit/enable 150 ms typ.
Applications
- None Available
Aliases
- None Available
Related Items
70-841-018
CONNECTOR KIT- 70-841-014
NTQ160 MATING CONNECTOR KIT - 7.361e+007
ASTEC MODEL PSE6-048-037 
70-841-004
Astec 70-841-004 Connector VS/MP Control Connector Kit