LPS128 - Astec LPS128 Power Supply - 48V 130W 3IN.X 5IN. Simple...
Request Quote
For Price
- Part Number:
- LPS128
- Model Number:
- LPS120 Series
- Make:
- ASTEC
- Lead Time:
- Available
- Qty In Stock:
- Available
Astec LPS128 Power Supply - 48V 130W 3IN.X 5IN. Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 5 V Standby output and 12V Fan output
- Active power factor correction
- Adjustable main output
- Built-in Class B EMI filter
- EN61000-3-2 compliant
- Overload protection
- Overvoltage protection
- Power fail and remote inhibit
- Remote sense
- Single wire current sharing
- Thermal overload protection
Specifications
- Adjustment range: ±5% minimum on the main outputs
- Efficiency: 80% typical at full load
- Electromagnetic susceptibility: designed to meetEN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
- EMI/RFI: FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted
- Fan output: 12V @ 500mA - 5%, +7%
- Frequency: 47-440 Hz
- Hold-up time: 20ms @ 125W load, 120VAC input
- Humidity: Operating; non-condensing, 10% to 95% RH
- Input range: 85 - 264 VAC ; 127 - 300VDC
- Inrush current: 40A max., cold start @ 25°C
- Maximum power: 80W for convection ; 130W with 30CFM forced air
- MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions
- Operating temperature: 0° to 50°C ambient derate each output as 2.5% per degree from 50° to 70°C. -20°C start up
- Overload protection: Short circuit protection on all outputs. Case overload protected @ 120-135% above rating
- Overvoltage protection: 20-35% above nominal output
- Power factor: 0.99 typical
- Power failure: TTL logic signal goes high 100-500 msec after main output; it goes low at least 4 msec before loss of regulation
- Remote inhibit: Requires a contact closure to disable the outputs, except 5V standby
- Remote sense: Compensates for 0.5 V lead drop max. Will operate without remote sense connected. Reverse connection protected
- Remote sense: Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected
- Safety ground leakage current: 0.5mA @ 50/60 Hz, 264 VAC input
- Standby outputs: 5V @ 500mA ±5%
- Storage temperature: -40°C to +85°C
- Vibration: IEC68-2-6 to the levels of IEC721-3-2
Applications
- None Available
Aliases
- None Available