AIF120 - Astec AIF120 DC-DC Converter Single output, 600 watt, 300 V...
Request Quote
For Price
- Part Number:
- AIF120
- Model Number:
- AIF120
- Make:
- ASTEC
- Lead Time:
- Available
- Qty In Stock:
- Available
Astec AIF120 DC-DC Converter Single output, 600 watt, 300 V input (250-420 VDC, 25-120A), 1.8-24 V output range Simple Type: DC-DC Converter
The AIF series high voltage full-brick dc-dc converters are designed for use with power factor correction (PFC) modules. They enable users to build complete high performance, low profile power supplies, with minimal non-recurring engineering costs and fast turnaround. Each dc-dc converter is a fully-featured module that provides monitoring, protection and adjustment capabilities, as well as communication facilities for use when storing valuable end-user information.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 108W/in3 (6.6W/cm3)
- 600W Continuous power at 100°C baseplate temperature
- EU Directive 2002/95/EC compliant for RoHS
- Excellent transient response
- High efficiency - up to 90%
- Low output ripple and noise
- OVP, OCP, V Adj control with ALPTM analog mode linear control, or through I2C bus with digital mode control.
- Paralleable with accurate current sharing
- Positive and Negative enable function
Specifications
- Amp range: 25 A - 120 A
- Clock Input (external sync): 3.3 to 5.5Vp-p @ 800KHz ±10%
- Clock Output (internal clock): 4.5Vp-p typical@ 800KHz ±5%
- Current Limit Adjus: 20 to 100% Io linear programming or digital mode control
- Current Monitor Output: 0 to 1mA (1mA
- Efficiency: 90%@5.0V (Typical)
- Enable: TTL compatible (positive & negative enable options)
- Input Range: 250 - 420 VDC
- Input surge: 450V / 100ms
- Line Regulation: 0.2% typical
- Operating Temperature: -20°C to +100°C (case temperature)
- Output Current Limit: 115% Io maximum
- Output Current Share Accuracy: 3% typical
- Output Load Regulation: 0.2% typical down to no load
- Output Noise/Ripple: 100mV typical (below 5V); 2% typical (5V and above)
- Output Overvoltage Protection: 115% Vo (nominal)
- Output Remote sense: Up to 0.5V
- Output Transient Response: 5% max for 3.3V and above, 150mV for 1.8V, deviation with 25% to 75% full load 250 µS (max) recovery
- Output voltage adjust range: +/-20% for 5V and above; +10%/ -50% for below 5V
- Over Voltage Protection Adjust: 110 to 150% Vo linear programming by voltage or resistor,or digital mode control
- Overtemperature protection: 110°C max
- Power Good Identification: High (Vo)
- Start up temperature: -40°C to +100°C (case temperature)
- Storage Temperature: -40°C to +125°C
- Temperature Monitor Output: 10mV/°K (2.73
- Voltage Adjust: 80 to 120% Vo linear programming for 12V, 15V, 24V, 48V 50% to 110% for 1.8V - 5.0V
Applications
- None Available
Aliases
- None Available