MP6-1V-1V-1V-00 - Astec MP6-1v-1v-1v-00 Power Supplies. 600-800W | 5 slots | 180-265...
Request Quote
For Price
- Part Number:
- MP6-1V-1V-1V-00
- Model Number:
- MP6-1V-1V-1V-00
- Make:
- ASTEC
- Lead Time:
- Available
- Qty In Stock:
- Available
Astec MP6-1v-1v-1v-00 Power Supplies. 600-800W | 5 slots | 180-265 VAC | 7A MX 50/60/400HZ MVP Series Simple Type: Power Supply
A 800 watt, enclosed frame modular AC/DC power supply. This chassis mount power supply has a 85-264 AC volt Wide-range input with power factor correction. It is a fully configurable power supply with an endless combination of outputs ranging from ±1.80-66.00v. It is medical, industrial rated with an operating temperature range of -20 - 50 °C and up to 80% efficiency.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Additional 200W output @ high line (180-264 VAC)
- CISPR 22, EN55022Curve B conducted / radiated EMI
- Current share on all outputswith ratings of 10 A or greater
- Customer-provided air option
- EN61000 immunity standards
- EN61000-3-2 harmonic distortion compliance
- EuropeanCE Mark requirements
- Field Demonstrated MTBF: > 550,000 hours at full load, 220 Vac & 25 °C ambient conditions
- Forced air cooling,field replaceable fan
- Global and individual module inhibits/enable
- GlobalDC OK signal and status indicator LED
- Input OK signal and status indicator LED
- Isolated 5Vbias voltage
- Low leakage option for medical applications
- Margining on all single output modules
- OptionalVME timing and system DC OK module
- Overload protection on all outputs
- Power factor correction
- Remote sense on all outputswith ratings greater than 2 A
- Standard modification flexibility (consult factory) | Low noise fan | Fan fail signal Module enable | Outputs down to 0.5V
- Voltage adjustment on all outputs
Specifications
- 105-120% of rated output current. Aux output of dual output module 105-140%: Output
- AC OK: >5 ms early warning min. before outputs lose regulation Full cycle ride thru (50 Hz)
- Adjustment range: ± 10% minimum all outputs
- Bandwidth limited to 20 MHz: Output
- Dual output module: 2-6 V 122-134% ; 8-28 V 110-120%
- Dynamic response: < 2% or 100 mV, with 25% load step
- Efficiency: 70 - 80% typ. @ full case load
- EMI filter (low leakage option): CISPR 22/EN55022 Level “A”
- EMI filter standard: CISPR 22/EN55022 Level “B”
- Frequency: 47 - 440 Hz
- Global Inhibit/Enable: TTL, Logic “1” and Logic “0”
- Harmonic distortion: Meets EN61000-3-2
- Holdover storage: 20 ms minimum (independent of input Vac)
- Input fuse (internal): MP4: 10 A; MP6: 15 A; MP8: 20 A; MP1: 20 A
- Input range: 85 - 264 Vac,120 - 350 Vdc
- Inrush Current: 40 A peak max. (soft start)
- Isolation: Meets EN60950
- Leakage current (low leakage option): 300µA max. @ 240 Vac
- Leakage current standard: 2.0 mA max. @240 Vac
- Margining: ± 4 - 6% nominal1
- Overall regulation: 0.4% or 20mV max.(36 W modules 4% maximum)
- Overcurrent protection: Single output module & main output of dual output module
- Overvoltage Protection: (measured at sense connection)
- Power Factor: 0.99 typ. meets EN61000-3-2
- Radiated EMI: CISPR 22/EN55022 Level “B”
- Recovery time: To within 1% in < 300 µsec
- Reverse voltage protection: 100% of rated output current
- Ripple: RMS: 0.1% or 10mV, whichever is greater,Pk-Pk 1.0% or 50mV, whichever is greater
- Short-circuit protection: Protected for continuous short-circuit Recovery auto upon removal of short
- Single output module: 2-5.5 V 122-134% ; 6-60 V 100-120%
- Triple output module: No overvoltage protection provided. Recycle AC input voltage to reset OVP circuit
- Turn-on time: AC on 1.5 sec typ. inhibit/enable 150 ms typ.
Applications
- None Available
Aliases
- None Available