MP4-1D-1E-1L-4LE-00 - Astec MP4-1D-1E-1L-4LE-00 73-540-0029 400Watts Max Modular Power Supply; V1: 3.3V/35A,...
Request Quote
For Price
- Part Number:
- MP4-1D-1E-1L-4LE-00
- Model Number:
- MP4-1D-1E-1L-4LE-00
- Make:
- ASTEC
- Lead Time:
- Available
- Qty In Stock:
- Available
Astec MP4-1D-1E-1L-4LE-00 73-540-0029 400Watts Max Modular Power Supply; V1: 3.3V/35A, V2: 5V/35A, V3: 12V/17A, V4: 12V/10A & V5: 5V/10A DC Outputs | 100-264V~; 7A Max; 50/60/400Hz Input Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Additional 200 W output @ high line (180-264 VAC)
- CISPR 22, EN55022 Curve B conducted / radiated EMI
- Current share on all outputs with ratings of 10 A or greater
- Customer-provided air option
- EN61000 immunity standards
- EN61000-3-2 harmonic distortion compliance
- European CE Mark requirements
- Forced air cooling, field replaceable fan
- Global and individual module inhibits/enable
- Global DC OK signal and status indicator LED
- Input OK signal and status indicator LED
- Isolated 5 V bias voltage
- Low leakage option for medical applications
- Margining on all single output modules
- Optional VME timing and system DC OK module
- Overload protection on all outputs
- Power factor correction
- Remote sense on all outputs with ratings greater than 2 A
- Standard modification flexibility (consult factory)
- Voltage adjustment on all outputs
Specifications
- AC OK : >5 ms early warning min. before outputs loose regulation, Full cycle ride thru (50 Hz)
- DC OK : -2% to -8% of nominal for any monitored output 2
- Dynamic response: <2% or 100 mV, with 25% load step.
- Efficiency : 70-80% typ. @ full case load
- EMI filter (low leakage option) : CISPR 22, EN55022 Level “A”
- EMI filter standard : CISPR 22, EN55022 Level “B”
- Frequency :47-440 Hz
- Global Inhibit/Enable: TTL, Logic “1” and Logic “0”
- Harmonic distortion : Meets EN61000-3-2
- Holdover storage: 20 ms minimum (independent of input VAC)
- Housekeeping Bias voltage: 5 VDC @250 mA max. present whenever AC input is applied (Consult factory if higher output current required)
- Input fuse (internal): 10 A
- Inrush current : 40 A peak max.
- Isolation: Meets EN60950
- Leakage current standard :2.0 mA max. @ 240 VAC Leakage current (low leakage option) 300 µA max. @ 240 VAC
- Margining: ±4-6% nom.1
- Module inhibit : TTL, isolated, singles and dual (both outputs) only
- Output/Output isolation : >1 Megohm
- Overall reg: 0.4% or 20 mV max. (36 W modules 4% max.)
- Power factor : 0.99 typ. meets EN61000-3-2
- Radiated EMI : CISPR 22, EN55022 Level “B”
- Recovery time: To within 1% in <300 µsec.
- Remote sense :Up to 0.5 V total drop
- Reverse voltage protection: 100% of rated output current
- Ripple: RMS: 0.1% or 10 mV, whichever is greater, Bandwidth limited to 20 MHz
- Single wire parallel: Current share to within 2% of total rated current 2
- Switching frequency : 250 kHz
- Thermal protection: All outputs disabled when internal temp exceeds safe operating range. >5 ms warning (AC OK signal) before shutdown
- Turn-on time :AC on 1.5 sec typ., Inhibit / Enable 150 ms typ.
- VME signal option board: POR signal
- Input: Input voltage : 85-264 VAC, 120-350 VDC
- Output: Adjustment range: ±10% min. all outputs
Applications
- None Available
Aliases
- None Available